Found system has refrigerant in it. clutch not engaging , fuses tested good. no power coming from integrated A/C clutch relay in TIPM . Need to replace TIPM and retest system for cooling.
HEATHER R. gave our service a 5 star review on 5/27/2026
Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front ( %) Rear ( %)
CHECK FOR WHEEL BEARING
CHECK FOR CLUNK IN FRONT END
STEERING GEAR ASSEMBLY – Remove & Replace – [Includes: Adjust toe-in on Rack and Pinion type Steering Gears.
(Combination) – TIE ROD &/OR END – Replace Each
(Combination) – TIE ROD &/OR END – Replace Each
ALIGN
STABILIZER LINK OR BUSHING – Remove & Replace – One Side
STABILIZER LINK OR BUSHING – Remove & Replace – One Side
STEVE C. gave our service a 5 star review on 2/19/2025
Initially had to jump start to get running. When vehicle Initially started up engine had timing chain noise. Checked engine oil and found 3.5 quarts low. Added oil to fill line and charged battery. Checked charging system found 14.3 volts and 69 amps at idle. Run code scan on all systems. P0700 transmission control system, P0562 battery system voltage low (pending) , C1009 brake fluid level low, U0184 lost communication with radio, C1008 brake fluid level circuit high, B104B floor /defrost mode door travel ratio large. Also found tack is inop. AIRED UP ALL TIRES. CLEARED CODES AND AND ONLY U0184 RADIO CODE CAME BACK.
ALLEN S. gave our service a 5 star review on 11/14/2024